woensdag 30 december 2015

Husqvarna Nuda Garmin Zumo 590LM

Under the Air Box Cover you will find the accessory plug.
It is a plug used also on BMW Motorcycles.
The black dust cover can be removed.

Remove the black dust cover.

I mounted a M8 RAM-B-367 Bolt on the upper clamp from the handlebar.

I bought an original  BMW accessory plug from the dealer (about 7 euro)
P/N 83 30 0 413 585

The original Zumo 590LM mount comes with a lot of wiring.
Very useful if you have a digital sound system on your Nuda.
I only want power on my system so I will get rid of the unnecessary wiring since I have no room to fit this any ware.

Splice the wiring you will only need the red and black cores
These are the 2 wire’s in the tinfoil not to be confused with those from the braiding.

On the original plug there are 3 wires (the numbers are stamped on the wires) 
No.1 wire = Ground
No.2 wire = is for a speed sensor, just cut this away, you don’t need this one.
No.3 wire = 12V

Solder it and use shrink sleeve.
Nice and clean


Led it along your gas cable and plug it in.
As you turn your ignition key to on you will have power on your navigation system.